© 2013, Continuum Footspas, LLC
April, 2013
MAESTRO
®
PEDICURE SPA
Technician’s Chair
Control Keypad (11)
Client Chair
Control Keypad (2)
The Maestro utilizes two Chair Control Keypads, one located on the arm (2) for the client; the other
located on the front panel (11) for the technician. Both keypads control forward/backward and tilting of
the chair. The chair will automatically stop when fully tilted, full forward/backward or when a move-
ment button is released.
ENTERING AND EXITING THE CHAIR
Clients must enter and/or exit chair ONLY when light is off
. This indicates the chair is in the
“home” position and can be safely swiveled allowing easy entering or exiting.
TO SWIVEL CHAIR -
The Chair Release Lever (6) is centered directly below the curved portion of the
chair. Gently lift up on the lever allowing the chair to swivel. This must be done each and every time a
client enters or exits the chair.
Please note:
In order for the chair locking mechanism to work proper-
ly, one must sit normally in the chair, that is to say, NOT on the outer edge of the chair, but rather sit-
ting back in the chair. This allows for the locking pin to engage and disengage easily.
When entering
: Lift the lever allowing the chair to swivel either left or right. With client seated, swivel
chair to front position until a click is heard. This safely locks the chair in place.
When exiting
: Push the button marked “PRESS” and wait for chair to return to the “home” position
and the light to go off. It is now safe to lift up on the lever, swivel the chair and exit.
CAUTION! Read and follow pinted instructions on both Chair Control Keypads.
Failure to do so can lead to injury.
IMPORTANT! Never spray water directly on the Technician Chair Control Keypad.
This will damage the keypad and void the Limited Warranty.
Chair Control
