© 2013, Continuum Footspas, LLC
April, 2013
MAESTRO
®
PEDICURE SPA
If You Don’t Read Anything Else, Please Read This!
Tips for Getting the Most from Your Maestro
®
Pedicure Chair
Always use a hand towel to cover and protect the footrest/leg support area. It will certainly help to
keep your Maestro looking brand new.
While we strongly recommend using an abrasive cleanser and a Scotch Brite
®
light duty pad
(#6448 or #7448) for cleaning the basin, DO NOT use this for cleaning the two adjacent leg
supports. Doing so will damage the outer layer of the leg support. Use only a mild cleaner and
soft cloth to clean the leg supports. Better yet, as suggested above, use a hand towel to cover and
protect this area.
Leg supports have been designed and engineered to lock in the up position. It may be necessary
to gently push down on the leg support to make sure it locks securely. To unlock, lift up and
carefully position to side of basin.
Optional manicure trays are available (depending on date of manufacture) for The Maestro. When
manicure trays are ordered with the pedicure chair, brackets will be factory installed. Simply attach
the trays with provided wood screws making sure they fit tightly against the upholstered arms.
If ordering manicure trays AFTER after shipping, please call Continuum Footspas at:
1-877-255-3030 for further assistance.
Gently twist off jet covers
. They will lock into place with a gentle turning motion. The brand name
“Luraco” should ALWAYS be located on the top.
In order for the chair locking mechanism to work properly, one must sit normally in the chair, that is
to say, NOT on the outer edge of the chair, but rather sitting back in the chair. This allows for the
locking pin to engage and disengage easily.
