15
Step 3: Compass Calibration
• Push the joysticks into the 11 o’clock (left joystick) & 1 o’clock (right
joystick) position.
• Lights will rapidly blink Blue (rear) and White (front).
• App Drone Status: “Gyroscope is Being Calibrated” then “Gyroscope okay”.
• From the bottom, hold the drone vertically so the camera is facing toward
the ground. Rotate your body in one full circle (360°).
• Front lights will turn to solid white.
• App Drone Status: “Compass Calibration Okay”
NOTE: If compass does not calibrate quickly, tap the screen on the Contixo
F35 App and restart the calibration process.
• Set the drone back down on a level surface.
• Lights will return to rapid-blinking Blue (rear) and White (front). This means
the drone is searching for the GPS signal.
• This process can take a few minutes.
• App Drone status: “Waiting for GPS Signal”
NOTE: Wait for rear lights to be solid blue and front lights white before
initiating takeoff.
Step 4: Reset to factory Setting/Calibrate Gyroscope
Step 5: GPS Searching (DO NOT use GPS Mode Indoors)
