background image

58

59

C

ontour

®

n

ext

 GEN blood glucose monitoring system

HELP

Transfer Results to a Personal Computer

You can transfer test results from the C

ontour

 n

ext

 GEN meter to a 

computer where they can be summarized in a report with graphs and 

tables. To make use of this feature, you need diabetes management 

software and a 1-meter (or 3-foot) long USB-A to Micro USB-B cable. 

This type of cable is available in electronics retail stores.

USB Port

Ensure your meter’s USB port door is 

completely closed when not in use.

Batteries

When the batteries are low, the Low Batteries symbol displays on 

every screen.

Replace the batteries immediately. When you see this symbol, you can 

only test about 10 more times at a frequency of 3 tests per day before 

the batteries are dead.

CAUTION: Do not attempt to perform a blood glucose test when the 

C

ontour

 n

ext

 GEN meter is connected to a computer.

CAUTION: Use only approved equipment from the manufacturer or 

certified body such as UL, CSA, TUV, or CE.

10 45

4 26 20

The meter operates normally, displaying the 

Low Batteries symbol until you replace the 

batteries.

When you are no longer able to perform a test 

due to low batteries, the meter displays the 

Dead Batteries screen. Replace the batteries 

immediately.

Replace the Batteries

1. Before replacing your batteries, 

turn off your meter.

2. Turn the meter over and slide the 

battery cover in the direction of 

the arrow.

3. Remove both of the old batteries and replace them with two 3-volt 

CR2032 or DL2032 coin cell batteries.

Summary of Contents for GEN












































Reviews: