MOUNTING THE OPENER
10
5. FIXING OF DOOR CURTAIN TO DRUM
WHEEL
The door curtain has to be secured to the drum wheel with
suitable fasteners.
1.
With the door in the fully closed position, mark the curtain
(Fig. 7)
on both ends of the door.
2.
Open door slightly to have access to the marked positions.
Secure the curtain to drum wheel using self drilling screws
(two on each end). The screws should be at least 90 degrees
apart.
FIG. 7
©Copyright 2006 B&D Doors
DRUM WHEEL
5.1 MOUNTING THE TRANSMITTER
BRACKET (Fig. 7.1)
1.
Locate wall mount bracket at least 1.5m above the floor, so that
young hands cannot reach.
2.
Attach to the wall with 2 x 3.5 max flat head screws
3.
Slide remote control onto wall mount bracket
NOTE - Tightening the wall mount screws will reduce
clearance between bracket and wall.
FIG. 7.1
