6
4.
Current transformer ratio settings
4.1
Press the "Enter" button for about 6 seconds.
4.2
The enter password screen will appear: "COD".
4.3
Use ↑ ↓ button to change the code to "1" and press Enter.
4.4
The current transformer set screen will appear, on the second line
the secondary value of current transformer (5A).
4.5
The headline "SET" will be displayed on the screen, on the
second line the secondary value of current transformer (5A), the
third line allows to define the value of the primary current
transformers with the "↑ ↓" buttons. At the end press Enter.
5.
Voltage transformer ratio settings
5.1
In order to set the voltage transformer repeat the steps that
mentioned in paragraph 4. Instead entering code “1” enter the
code”11”. On the second line the secondary value of voltage
transformer (110V).
