8
8.
Minimum \ Maximum values display
8.1
Clicking on the “Min/Max” button will zoom to the next
Min\Max item or use the "↑ ↓" buttons (each click scrolls the
screens circularly). The first screens present the highest measured
values of voltage and current (Hi); the next screens present the
lowest measured values of voltage and current (Lo) and then
respectively high and low frequency and power factor for each
phase.
9.
Indication led
9.1
The indication led easily enables to identify whether there is
voltage in phases L1, L2, L3. In case there is voltage in phases
connections the led will be turned on (50 VAC at least).
