3
1. Check Components
1.1 Components included with this System:
Your MA-D alarm kit is designed to be a complete system for your
home, cabin, apartment or business. Note that none of the
components are designed for outdoor use.
The kit includes:
•
1 - Keypad Receiver (Control Unit)
•
1 - PIR Motion Sensor (transmits at 315 MHz)
•
1 - Door or Window Sensor (transmits at 315 MHz)
•
1 - 3 Button Remote Control (transmits at 315 MHz)
•
1 - Siren Horn – 120 decibels at 3 feet (wired)
•
1 - Plug in Transformer
•
1 - Rechargeable 12-volt battery
NOTE: You will need to install new 9-volt alkaline batteries in the
PIR and Door/Window sensors, and a rechargeable 12-volt battery
in the keypad unit. The rechargeable 12 volt battery is included with
the MA-D, but it comes uncharged. When you plug in your Control
Unit to a power source, the battery will begin charging. It should be
fully charged within 12 to 24 hours.
NOTE: You must use a 12-volt rechargeable battery for the keypad
unit. This is the backup supply when A/C power is down.
PIR Sensor
Door/Window
Remote Control
Siren
Control
Unit
1.2 Keypad LED Indicators
The display lights on the keypad unit indicate the following:
Power:
On when power from AC adapter is supplied.
Arm/Disarm:
Flashes in the Away mode, solid in the Home
mode and off when in the Disarm mode.
Low Battery:
On when a low battery is detected from a
sensor.
Help/Tamper:
On when Help button is pressed from the
remote control, or when a device has been
opened.
