7
Template for Wall
Mounting the
miniAlarm™
Place this against the wall
where you wish to mount
the miniAlarm™
Using a pin or nail, make a
mark by pushing it through
the circles at the left.
3.75”
9.5 cm
1724 Lake Drive West
Chanhassen, Minnesota 55317
Document Number: 42420005 Rev C
WARRANTY & REMEDY
Warrantor: Dealer, Distributor, Retailer, Manufacturer
Warranty and Remedy:
We believe this is a very fine product. Although we take extreme pride in producing and testing a product that will function properly, we cannot
guarantee that there will never be a defective unit or that a unit will function on all the thousands of phone lines and communication equipment in
existence. For this reason, it must be clear that the Warrantors are not insuring your premises or guaranteeing that there will not be damage to
your person or property if you use this Product. If you are not comfortable with our Limited Warranty, or completely satisfied with the Product, we
encourage you to return the unused Product for a full refund within 30 days of purchase. Thank you for your understanding.
One Year Limited Warranty – Control Products, Inc. warrants its products to be free from defects in material and workmanship under normal use
for one year, and is not responsible for consequential damages or installation costs of any nature. In the event that the Product does not conform
to this Warranty at any time during the period of one year from original purchase date, Warrantor will repair the defect and return it to you at no
charge. IMPORTANT: The Warranty is limited to replacement of the Product ONLY. Secondly, because every phone line differs, we strongly
encourage you to fully test this Product in its actual application. This should include a full test, involving the Product actually dialing to its desig-
nated locations and someone verifying the proper response.
This Warranty shall terminate and be of no further effect at the time the Product is 1) damaged by extraneous causes such as fire, water, lighten-
ing, etc., or not maintained as reasonable and necessary; 2) modified; 3) improperly installed; 4) repaired by someone other than the Warrantor; 5)
used in a manner or purpose for which the Product was not intended.
WARRANTORS’ OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT ONLY. THIS
WARRANTY DOES NOT COVER PAYMENT OR PROVIDE FOR THE REIMBURSEMENT OF PAYMENT FOR INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES.
It must be clear that the Warrantors are not insuring your premises or guaranteeing that there will not be damage to your person or property if you
use this Product. The Warrantors shall not be liable under any circumstances for damage to your person or property or some other person or that
person’s property by reason of the sale or use of this Product, or its failure to operate in the manner in which it is designed. The Warrantors’
liability, if any, shall be limited to the original cost of the Product only. Use of this product is at your own risk.
Procedures for Obtaining Performance for Warranty:
In the event that the Product does not conform to this Warranty, the Product should be shipped or delivered freight prepaid to Warrantor with
evidence of original purchase. If in any way your are not comfortable with this product or its Limited Warranty, we encourage you to return it
unused within 30 days of original purchase date with evidence of the purchase date.
To return your miniAlarm™ to Control Products, Inc.:
All products being returned to Control Products must have a valid Returned Goods Authorization Number (RGA #) from Control Products, Inc.,
regardless of why the product is being returned. Warranty returns will be honored only with an RGA #. Ship warranty returned products prepaid to
Control Products, Inc. 1724 Lake Drive West, Chanhassen, MN 55317. Control Products, Inc. will, at its option, either repair or replace the product
free of charge and return the repaired unit or replacement unit at the lowest cost shipping prepaid. Products returned for credit are subject to a
15% restocking charge. Returns resulting from errors by the seller are not subject to this charge. All returns must include evidence of original
purchase, showing purchase date. The RGA # should be clearly marked on the outside of the package containing the product.
To request an RGA #, call Control Products, Inc. at 952-448-2217 and ask for Customer Service. Failure to have an RGA # may result in lost
product or significant delays in handling your return. Products without an RGA # clearly marked on the outside of the package are not the
responsibility of Control Products, Inc.
