4
Control Solutions, Inc. | 503-410-5996 | support@vfcdataloggers.com
The most recently recorded
temperature, 48
°
F, is displayed.
This is updated at the same rate as
the logging interval.
The current time is
shown in 24hr
(military) format,
1:29pm.
An X is shown instead of
because there is an alarm.
The alarm day
summary shows when
an alarm was
recorded.
▲
indicates high
alarms
T
indicates an alarm
today
-3 indicates an alarm
3 days ago
The number of days the logger
has been recording is shown
here.
Remember to download data on
a regular schedule. Allowing the
memory to become full will cause
your logger to stop recording.
Reading the
Display
This example shows the next day at 1:49am
The temp is now within range however; the
X
remains and
the audible alarm will continue to sound until the data is
downloaded.
The temperature has
returned to an
acceptable range but
the alarm status
remains.
The day summary has shifted by 1 day as the display time has
gone through midnight (00:00).
-4 day and -1 day are displayed indicating an alarm occurred
4 days ago and 1 day ago.
