Overview of the Access Window
On the logic controller, an access window is available to change and adjust many different values.
Each value is referred to as a “device”. The window comprises of 3 primary areas: The device
selector window, operation keys, and the main display window.
Although the logic controller is capable of many functions, all of the devices that the control head
operates from are accessed in “Device Mode”. When device mode is active, the display screen
will show DM in the top left corner.
That being said, it is possible to stray from the device mode settings. In the selected device type
section of the access window, DM, TM, T/C, CTC, TRM, and RLY are all possible selections
to load. Again, we are only using DM (device mode) with the
Beacon series
.
Should you find that you accidently have loaded any other selected device type, simply press
to scroll until you have once again loaded the DM type.
Security Begins With Controlled Access
1636 W. 130th Street, Brunswick, OH 44212
Toll Free Phone: (800) 942-0829 | Fax: (800) 942-0828 / Phone: (330) 273-6185 | Fax: (330) 273-4468
17
