Pre-installation Preparation (cont.)
Removing the front panels:
The next step before being able to access the floor plate is to remove the front panels of
the cabinets. With the lid removed, two 10/32 screws are found in the top corners of each
panel. Simply remove these screws and the front panel can be removed by tilting it
forward and lifting it out of the floor plate
Although it should not be necessary, the sensors can be disconnected from their cables.
Each sensor is equipped with an M8 euro style quick disconnect cable. These can be
disconnected so that the panels can be completely removed from the area to provide more
work space. Simply unscrew the thread on the cable where it connects to the sensor and
remove.
Security Begins With Controlled Access
1636 W. 130th Street, Brunswick, OH 44212
Toll Free Phone: (800) 942-0829 | Fax: (800) 942-0828 / Phone: (330) 273-6185 | Fax: (330) 273-4468
7
