www.ControlloCasa.it
info@controllocasa.it
+39 06 94804820
5.
Enter the name of your WiFi network and its Password in the respective fields, then
validate them by selecting the ACTIVATE button
At this point you will see the following graphical interface
After about 20 seconds, if the data entry was correct, you will see the following
graphical interface
If the WiFi network configuration operation was successful,
take note of the USBy ID
shown in the screen above (in red) as it will be required during the next USBy
activation phase (see section 2.1.2)
.
123456789ABC
