www.ControlloCasa.it
info@controllocasa.it
+39 06 94804820
If the WiFi network configuration operation was not successful and if the following
interface is displayed, it will be necessary to place the USBy closer to your Router /
Modem and to repeat the procedure from step 4.
Note-2: If the configuration of the WiFi network was not successful, repeat the
procedure from step 4 checking the correctness of the name of the Wi-Fi network
and Password
Note.3: The chosen WiFi network must be password protected
At this point, you only need to activate USBy on our website
www.controllocasa.it
2.1.2
Activate USBy
1.
From your device (PC, iPhone, ...), open the list of WiFi networks and select your WiFi
network (the one used for the Internet)
2.
Open your Web browser and enter the following URL:
www.controllocasa.it/activation.html
At this point you will see the following graphical interface
