15
CONVAID USER’S GUIDE
1. Remove Seat Upholstery. Fig.28,29
2. Change and Install Seat Depth Tubes.
3. Press spring button and move Seat
Depth Tube to desire setting. Fig.30
4. Install Support Strap. Note: Make sure
rough, shiny side of strap is facing out.
Fig.31-34
5. Install Seat Upholstery. Fig.35
Attaching Support Strap for Seat Extension Tubes
Two-Piece Seat
Fig. 28
Fig. 30
Fig. 34
Fig. 32
Fig. 29
Fig. 31
Fig. 35
Fig. 33
Fig. 36
Fig. 37
Fig. 38
FOR TEXTILENE UPHOLSTERY: Only Applicable to: CX 14-18
Make sure the seat depth
tube inserts into the black
web loop located on the
inside corner of the
textilene upholstery. Fig.36-38
The lower seat panel is attached to the back panel with Velcro
®
.
It is used to take up slack in the seat panel after seat depth adjustments have been made.
Fig. 39
Excessive Velcro
®
overlap lifts seat
fabric and pushes
hips forward, cre-
ating poor posture
and reducing
effective seat
depth. Fig.39
Correct
Velcro
®
adjustment
provides room
for hips, and
makes greater
use of seat
depth.
Wrong
Correct
