36
CONVAID USER’S GUIDE
Heavy Duty Reinforced Upholstery
Rear Anti-Tip Tubes
Reducer Seat Insert
Heavy duty, reinforced, padded seat and seat back come with pockets which
have removable plastic stiffeners. Use when extra firmness is required.
Stiffeners easily lift out of pockets for custom forming with a heat gun. Fig. 123
The Reducer Seat Insert provides proper positioning in an oversized wheelchair.
This cushion easily slips into the seat of the chair to reduce the seat width 51
mm and the seat depth 25 mm. The ribbed surface provides comfort and
promotes airflow. Fig. 124
See diagram below for how to configure anti-tip tube for your specific size.
1. To install the anti-tip tube, align the tube with the end of the square frame tubing located next to
the rear wheel. Fig. 125
2. Position the anti-tip tube onto the square frame tubing (Fig. 126), and push until the “release
button” pops through the hole located on the anti-tip tube. Fig. 127
3. Repeat steps 1 & 2 for opposite side.
4. To remove the anti-tip tubes, perform above steps in reverse order.
Fig. 123
Fig. 124
Fig. 125
Fig. 128 (For EZ 12 & 14)
Fig. 126
Fig. 129 (For EZ 16 & 18)
Fig. 127
