50
CONVAID USER’S GUIDE
Important Information
Maintenance, Operating & Safety Instructions
• READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT
• ALWAYS FOLLOW THESE SAFETY INSTRUCTIONS
• SAVE SAFETY INSTRUCTIONS FOR FUTURE REFERENCE
• For increased safety, the seat belt should be used at all times.
• Do not leave user unattended.
• Do not strap user too tight.
• Straps should not interfere with breathing or circulation.
• Always apply wheel locks before letting go of the chair.
• If front edge of seat is at or forward of the point where tires
touch the floor, avoid using front of seat tubes for support
during entry or exit from chair to prevent tipping.
• Avoid using footplates for weight support during exit or entry of
the chair.
Waste Disposal
The shipping carton should be kept for possible return to the manufacturer/service facility for
repair or maintenance. Other paper packaging waste should be set aside for recycling. For
disposition of replaced parts or the complete chair, the materials should be separated into: plastic,
rubber, steel, aluminum, etc., and set aside for recycling.
Intended Use
The Convaid EZ Rider is an attendant-propelled device, its intended function and use is to provide
mobility to persons with physical disabilities who are frequently or permanently non-ambulatory.
Suitable Environment
The chair is intended for both indoor and outdoor use. If the chair is used in the rain, the excess water
should be wiped off with a soft cloth. If the chair is splashed with mud or corrosive substances like salt
water or road salt, the chair should be washed clean with water, wiped dry and a hypoallergenic and
biodegradable lubricant reapplied to the moving parts. The chair should never go into seawater, as it
will corrode areas that cannot be washed clean. When going from outside to inside, clean any excess
dirt or mud from the wheels to prevent soiling of inside environment.
WARNING:
Fig. 152
