4
CONVAID USER’S GUIDE
WARNING:
Always secure user with belt first, before making any other
adjustments.
WARNING:
Before removing the user from the chair and before returning the
user to the chair, always engage the wheel locks. Never remove or place user
without engaging the wheel locks.
WARNING:
Never leave the user unattended in the chair even when he/she is
strapped in and the wheel locks are engaged.
WARNING:
Do not stand on the foot support when getting into or out of the
chair.
WARNING:
When the user reaches for objects in front, to the side, or behind
the chair, be sure that they do not lean out of the chair too far since a shift in
the center of gravity might cause the chair to tilt or tip over.
WARNING:
Positioning belts should never be used as a safety restraint device
in a motor vehicle when transporting chair with occupant. An additional WC19
(ISO 7176-19) compliant automotive type seat belt is required when the chair is
used in transport vehicles.
WARNING:
Do not use the chair unless it has proper tire pressure (Front 36
psi/Rear 30 psi, 248kPa/200kPa, 2.5BAR/2.0BAR). Do not overinflate tires.
Failure to follow these instructions may cause the tire to explode and cause
harm. Tire size and maximum pressure are listed on the wheel.
WARNING:
Ensure the wheels are installed properly. You will hear a “click”
when wheel locks into place.
WARNING:
Do not leave/store the chair in direct sun/heat over a long period of
time. Check the temperature of the chair prior to usage.
WARNING:
Removable accessories that can be removed without tools will not
cause adverse effects on wheelchair.
