5
CONVAID USER’S GUIDE
WARNING:
Whenever you change a setting on the chair, make sure that
you firmly tighten any screws or knobs that have been loosened prior to
placing the user in the chair.
WARNING:
Motor vehicle safety – The seating module is not designed,
tested or intended to be used as a car seat. Never use the seating mod-
ule as a car seat. Transfer the user from the chair to an approved motor
vehicle adaptive car seat. If your chair is equipped with the transit option,
refer to the transit section in this user’s guide regarding use of this chair
for transit.
WARNING:
Never use this chair on an escalator because the chair may
tip over.
WARNING:
Many of the screws, bolts, and nuts used on this chair are
specialized or high-strength fasteners. Only use fasteners purchased
through Convaid or a Convaid service dealer.
WARNING:
Do not use the chair unless it has proper tire pressure.
(Front 36 psi/ Rear 30 psi, 248kPa/200kPa, 2.5BAR/2.0BAR) Do not
over inflate the tires. Failure to follow these instructions may cause the
tire to explode and cause harm. Tire size and maximum pressure as
listed on the wheels.
WARNING:
The chair could lose its flame resistant characteristics when
using aftermarket seating or cushion.
WARNING:
Do not leave/store the chair in direct sun/heat over a long
period of time. Check the temperature of the chair prior to usage.
