CONVAID USER’S GUIDE
7
Seat Depth
Fig.24
Measure from the most
posterior portion of the
buttocks to the back of
the knee. Subtract from
that measurement 1-2” to
allow adequate clearance
between the seat and the
back of the knee.
Fig. 23
Remove seat cushion from seat fabric.
Unsnap the fabric from the back of
the seat. Remove screws from adjust-
ment holes on sides of seat frame and
slide seat tube to desired position.
Reattach screws and snaps and
replace seat cushion.
Fig. 24
Seat depth
Note: Do not over tighten.
Proper seat width enables the user to sit comfortably and
prevents problems from developing. While user is seated on
a flat surface, measure from hip to hip.
Fig. 21
The user should have enough room to prevent hips and
thighs from rubbing against the frame. However, the chair
should not be too wide or the user will slide around and
posture could be affected.
Seat Width
Fig.22
Fig.21
The seat width
measurement is
taken from the
inside of the
armrest tubes.
Fig. 22
Fig.23
