30
SAFARI TILT
• Verify firm Velcro attachment of the cushion to the wheelchair seat.
• Access the stability of the wheelchair after attaching the cushion to the
wheelchair seat.
• If and whenever possible and feasible, the rider should transfer out
of the chair and into an approved vehicle seat and passenger
restraint system.
However, if a transfer is not possible, use only
designated chairs in a moving vehicle which apply to the wheelchair
Tiedown and Occupant Restrain System (WTORS) following the
requirements of SAE J2249. Follow tie-down harness manufacturer’s
instructions carefully and refer to Convaid’s ‘Transit Guide’ for specifics.
• When going up a curb or step, face
forward and tilt the chair back to lift the
front wheels over the curb. Move forward
and lift the rear wheels over the curb.
• When transferring user to or from chair,
apply foot wheel locks.
• Maintain control of chair at all times
while going up/down ramp. Avoid steep
slopes, particularly with a heavy
occupant. If in doubt, do not attempt a
descent unless a third party is present
to help maintain control of chair.
• When going down a curb, approach the
curb backwards. Lower the rear wheels
down the curb and continue backwards,
taking the weight off the front wheels so
they can be gently lowered.
