HOSS Jr. - Owner's Manual 13
Getting On and Off The
Hoss Jr.
The following is a recommended method for getting on your
Hoss Jr.
.
1. The wheelchair should be stopped on a flat, level surface with the power switch
in the OFF position (no visible lights).
(SEE WARNING AT BOTTOM OF PAGE)
2. Raise the foot rest plate so that you may back up to the wheelchair
squarely.
3. Position yourself squarely in front of the seat and lower yourself into the seat
using the armrests if necessary. (Never use the control housing or joystick as a sup-
port while getting on and off the wheelchair.)
4. Lower the footrest and place your feet securely on the footrest.
5. Buckle the safety belt around yourself belt to help hold yourself securely in the chair.
6. Push the power button on the speed control, the LED lights should activate.
7. When seated comfortably, you can drive the
Hoss Jr.
.
The method for getting off is the reverse procedure.
1. Turn the power switch OFF when stopped (no visible lights).
2. Unfasten your safety belt and raise (or have someone raise) the footrest bracket.
3. Make sure your feet are planted firmly on the ground and stand up.
WARNING
Keep the power button in the OFF position at all times when stopped or when getting on
or off the wheelchair. Sudden accidental movement of the wheelchair will be avoided
with the power switch in the OFF position.
Tipping can occur if you get on the
Hoss Jr.
in a manner other than recommended. Tipping
can be avoided by keeping your weight away from the outer edges until seated. If you step
into the wheelchair, sit directly in the center of the seat, not near the edge. Tipping may also
occur if you turn the joystick sharply while traveling at or near full throttle.
