HOSS Jr. - Owner's Manual 21
REASSEMBLING THE WHEELCHAIR
To reassemble the wheelchair, simply repeat the same steps in reverse
order. 1.) Replace the foot plate on the frame assembly and replace
the wing-nuts and bolts.
WARNING never operate the unit without r eattaching the fr ont
section and the bolts/wing-nuts which holds the front section in
place!
Put the batteries in place and connect the battery cables. Align the red
dots on each connector so that they line up. Push the plug straight in
until the connectors click together. Place the connectors between the
batteries.
Replace the rear cover by running the control cable through the hole in
the cover and setting the cover securely on the frame. Make sure the
velcro on the cover attaches to the velcro on the rear frame support
piece.
Place the seat assembly onto the four height adjustment posts. Connect the control cable to
the controller.
Follow the entry instructions elsewhere in this manual, and go for a ride.