HOSS - Owner's Manual 15
3. Position yourself squarely in front of the seat and lower yourself into the seat using the
armrests if necessary. (Never use the control housing or joystick as a support while getting
on and off the wheelchair.)
4. Lower the footrest and place your feet securely on the footrest.
5. Buckle the safety belt around yourself belt to help hold yourself securely in the chair.
6. Push the power button on the speed control, the LED lights should activate.
7. When seated comfortably, you can drive the power wheelchair.
The method for getting off is the reverse procedure.
1. Turn the power switch OFF when stopped (no visible lights).
2. Unfasten your safety belt and raise (or have someone raise) the footrest bracket.
3. Make sure your feet are planted firmly on the ground and stand up.
WARNING
Keep the power button in the OFF position at all times when stopped or when getting on
or off the wheelchair. Sudden accidental movement of the wheelchair will be avoided
with the power switch in the OFF position.
Tipping can occur if you get on the power wheelchair in a manner other than recommended.
Tipping can be avoided by keeping your weight away from the outer edges until seated. If you
step into the wheelchair, sit directly in the center of the seat, not near the edge. Tipping, loss of
control or traction (wheel spin) can also occur if you turn the joystick sharply while traveling at
or near full throttle and on slick surfaces or inclines.
