Audio → PCM 2CH
3. The EDID selection will only activate when the unit is re-plug and power on.
4.
System Reset:
Switch to “ON”, the system will send the internal CEC to the
display within 8~10 minutes to force all the displays to switch to HDMI 1
input port. Meanwhile, the source’s CEC will not functional to the system.
When switch to “OFF”, the system reset function will be terminate. Factory
default is on “OFF”.
5.
HDMI input:
This slot is for connecting the source equipment with HDMI
cables.
6.
HDMI output:
This slots is for connecting the display with HDMI Cable.
Note:
A. Cable tested with CAT-6E / 23AWG / Solid and therefore, cable with
different specification may result in different distance.
B. Cable distance tested with equipment PS3 40G, and 37" SamSung 12 bit
LCD TV.
C. Figures provided in this manual are reference figures only, actual
figures may depend on source and display use with cable specification.
7.
Video/DDC 2~8:
These slots allow you connect to the HDMI displays with
CAT6 to HDMI receiver. When more than one output are connected, the
HDMI outputs play identical video signal simultaneously.
8.
Power:
This slot is to plug the 5VDC power supply included in the package
into the unit and connect the adaptor to an AC wall outlet.
IR Pin
Definitions
Note:
The frequency on both IR Receiver & Blaster can support 20~60KHz.
