for an IR Output jack (next to
each HDMI input).
M0 = 1~10 (supports multiple
port selection by using “+”.)
Note:
Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive.
Telnet Control
Before attempting to use Telnet control, please ensure that both the
unit and the PC/Laptop are connected to the same active networks.
To access Telnet in Windows 7, click on the “Start” menu and type
“
cmd” in the search field, then press “Enter”.
Under Windows XP go to the “Start” menu, click on “Run”, type “cmd”
then press “Enter”.
Under Mac OS X, go to Go → Applications → Utilities → Terminal.
See below for reference.
Once in the CLI (Command Line Interface) type “Telnet” followed by the IP
address of the unit and “23”, then hit “Enter”.
This will connect us to the unit we wish to control. Type “help” to list the
available commands.
