Connect from these CAT outputs to the CAT input port of the receiver units
with a single CAT5e/6/7 cable for HDMI Audio/Video and IR/RS-232 control
signal transmission.
9.
HDMI IN 1~8:
Connect to the HDMI input source devices such as a DVD player or a Set-
top Box with HDMI cable or DVI to HDMI cable.
10.
DC 24V MAIN POWER:
Plug the 24 V DC power supply into the unit and connect the adapter to an
AC outlet.
11.
PoC 24V:
Plug the 24 V PoC power supply into the unit and connect the adapter to an
AC outlet. This unit will power PoC (Power over Cable) capable receiver
units.
Side Panel
1. Fan Ventilator:
These are air ventilation areas,
DO NOT
block these areas or cover it with
any object. Please allow adequate space
around the unit for air circulation
Remote Control
1.
POWER:
Press this button to
switch on the device or set it to
standby mode.
2.
IN:
Input ports selection 1~8.
3.
OUT:
Output ports selection A~H
