UARTSW0
Switch output's UART to MCU.
Restoring RS-232 control to the
Receiver output back to Matrix.
UARTBAUD?
Display all the outputs UART baud
UARTSW?
Display the UART switching state
?
Display all the available commands
Quit
Exit(for telnet only)
Note:
Any commands will not be executed unless followed by a carriage return.
Commands are case insensitive.
Telnet Control
Before attempting to use the telnet control, please ensure that both the Matrix
(via the 'LAN port) and the PC/Laptop are connected to the active networks.
To access the telnet control in Windows 7, click on the 'Start' menu and type
"cmd" in the Search field then press enter.
Under Windows XP go to the 'Start' menu and click on "Run", type "cmd" with
then press enter.
Under Mac OS X, go to Go→Applications→Utilities→Terminal
See below for reference.
