1. Power:
Plug the 5VDC power supply into the unit and connect the adaptor to
AC wall outlet.
2. PC/HD Output:
Connect the PC output D-Sub (15-pin) port to the D-Sub input
port of your display.
3. Menu Button:
Press the MENU button to bring up OSD operation menu. (See
section "4. OSD Operation" for reference.)
4. +/- Button:
1. On the first tier of OSD menu, use + and - buttons to move up/down the
highlight item for selection.
2. Once the desired option is selected, use + and - buttons to toggle between
setting values.
Note:
Reset: Press [MENU] and then [ - to switch to 480p mode. Press [MENU] and
then [ + ] to switch to XGA mode.
OSD Operation
1 st Tier Option
2
n
d Tier Option
Adjustment
CONTRAST
-
0 - 100 of Contrast Level
BRIGHTNESS
-
0 - 100 of Brightness Level
FINETUNE
- HUE
0 - 100 of Hue Level
- SATURATION
0 - 100 of Saturation Level
- SHARPNESS
0 - 100 of Sharpness Level
-
EXIT
Back to 1st Tier
COLOR
- RED
0 - 100 of Red Color Level
- GREEN
0 - 100 of Green Color Level
- BLUE
0 - 100 of Blue Color Level
-
EXIT
Back to 1st Tier
SIZE
FULL / OVERSCAN / UNDERSCAN /
LETTERBOX / PANSCAN
OUTPUT
NATIVE / VGA / SVGA / XGA /
SXGA /UXGA / WXGA / WSXGA /
WUXGA / 480i / 480p
/720@60Hz / 10801@60Hz /
1080p@60Hz / 576i / 576p /
720p@ 50Hz / 1080i@50Hz /
1080p50Hz
OSD
- HPOSITION
0 - 100 of OSD Horizontal Position
- VPOSITION
0 - 100 of OSD Vertical Position
- TIMER
0 - 100 of OSD Existing Time (sec.)
- BACKGROUND 0 - 100 of OSD Transparent Level
-
EXIT
Back to 1st Tier
INFORMATION
-
SOURCE (Input Interface)
INPUT (Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
EXIT
Close OSD Menu
