At this point, the selected parameter will turn red, and you can use +,- to
increase or decrease the value of the parameter.
When adjustment is complete, Press "Menu" to leave the parameter. Move
the tick "V" to "Exit", then press menu/enter to exit.
Output Setup
When Output Set up is selected a submenu as below appears:
Output Setup
V Timing XGA
Exit
Press the " MENU/ENTER" button to enter into output timing select mode.
Press +,- to toggle through a variety of output resolutions as below.
Once your desired resolution is selected. press the menu/enter
to enter the resolution.
Note: 1. All output resolutions except 576p have 60Hz vertical rate,
The 576p resolution has 50Hz vertical rate.
DVI-I Pin
Configuration
DVI-Integrated(DVI-I): Supports both analog and digital conn
ections to
the display.
This 29-pin connector can carry single or dual-link all-digital video/data
signals on 24 pins and uses 5 pins to carry analog video/data signals and
ground.
