②
Composite (CV) input:
This slot is where you connect the input
source
equipment such as personal media player or personal recorder with
RCA cable for input signal sending.
③
DC 5V In:
This slot is where you plug the 5V DC power supply into the
unit and connect the adaptor to an AC wall outlet.
Right Side Panel
①
Output resolution switch:
This dip switch allows you to set
PC/Composite
output Timing to PC resolution:
XGA/SXGA/UXGA or
Component resolution:
480p/576p/720p/1080p. Simply push the dip
switch to left, middle or right and the output image will display your
desire timing. For PC/
Composite timing selection please refer to Front Panel Section .
②
PC OUT:
This slot is where you connect the output display monitor
with
D-Sub 15pin cable for image display. When connecting to TV, using
D-Sub 15pin to 3RCA adaptor is required.
Front Panel
①
PC/HD switch:
This dip switch allows you to select PC or component
HD timing output. Simply slide the dip switch to left or right and the output
mode will display your desire selection.
Top Panel
①
CV/SV SW & LED:
Press this button to switch input source between
composite or S-Video. The Led will illuminate in yellow when switch to
composite input and red when switch to S-Video input.
