Connection and Installation
The AC adaptor power unit should not be plugged into a wall outlet until all connections
are complete.
-
Using your connector cable connect the output (Number 3/4 on Front panel) to your
device. Output either being RF or Video.
-
Using your connector cable connect the input (Number 2/3 on Rear panel) to your
device. Input either being Audio or Video.
If RF needs to be used it can be switched to BYPASS. Switch to BYPASS and select
video input to RF output. Or you can switch to the CONVERT and select NTSC to PAL
RF output.
Once all connections are complete please connect the power supply provided to the
power socket (Number 1 on rear panel).
Specifications
Power requirements
DC 7.5 V 500mA Center negative
Video Input
1 Vp-p 75ohm phone jack
Video Output
1 Vp-p 75ohm phone jack
Audio Input/Output
Phone jacks thru unit
Operating temperatures
5 degrees to 40 degrees
Weight
Approx. 240 Grams
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,
sales@converters.tv
Phone +61 249689313 Fax +61 249689314
www.converters.tv
