Introduction
This unit allows information from your computer (VGA) to be viewed on a TV in either
PAL or NTSC. It converts three most often used PC modes- 1024 x 768, 800 x 600, 640
x 480 into NTSC and PAL with a touch of the remote control.
Precautions
1. Do not expose this product to direct sunlight.
2. Keep the unit away from radiator, heat sources and magnetic field.
3. Do not place it in very dusty or humid locations.
4. Use this unit in a horizontal position only.
5. Do not put heavy objects on top of the converter.
6. Put the unit in an open space that has good ventilation.
7. If the unit is acting abnormally keep the unit away from TV or other electronic
equipment.
8. Unplug the unit from the power supply when it is not to be used for a long period
of time.
Features
•
Plug-and-play design, no software drivers required.
•
Cross-platform compatibility for PC, Macintosh and Notebook.
•
3 levels of brightness control plus 8 levels of sharpness control.
•
Traditional Zoom & Pan.
•
2X Zoom for one specific area.
•
Screen freeze/unfreeze.
•
Vertical and horizontal over-scan/under-scan control.
•
Simultaneous display on PC and TV monitor.
•
Composite, S-Video (S-VHS or Hi-8) and RGB output.
•
Video output available in NTSC and PAL.
•
Automatically supports scan rate from 50 Hz up to 100Hz.
•
Selective high clarity 5-line anti-flicker filter.
•
Built-in colour bar generator.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,
sales@converters.tv
Phone +61 249689313 Fax +61 249689314
www.converters.tv
