Cook Vision sizzle, Instruction Manual

Cleaning, Care, Maintenance

Cleaning, Care, Maintenance

Your new 

sizzle

 is exceptionally easy to maintain. You should always 

execute the following cleaning recommendations thoroughly so that 
you may enjoy using your 

sizzle

 for a long time to come.

Cleaning sizzle

•  Do not use any harsh or abrasive cleansers, since the surface of 

the 

sizzle

 could be damaged.

•  Clean your 

sizzle

 – if possible – directly after using, so that 

leftover food does not have a chance to dry and stick onto your 
cooker.

•  Stains on the bottom of the pot can be easily removed with 

lemon or vinegar. If you have limescale deposits, use a 
limescale remover.

•  Clean all parts after each use: 

- Wash all parts with hot water and washing-up liquid

- Rinse them with clean water 

- Dry the parts off in order to avoid water spots 

•  Should the pressure release valve be very soiled, you can 

unscrew it under the lid, clean the valve and screw it in again. 

•  You can easily disassemble the lid to exchange or clean the 

gasket thoroughly:

Remove the knurled nuts under the lid. 

Attention:

 Don’t lose the gasket.

Press the lid closure mechanism until the clamps are open. Now 
you can remove the glass plate. 

After that you can exchange the seal easily.

The valves can be disassembled and cleaned easily.

The cover panel of the lid handle is only clipped on and can 
simply be removed.

Tips

•  We recommend that you hand wash the 

sizzle

 lid in the sink.

•  Pot and steamer insert can easily be washed in the dishwasher.

•  The gasket cannot be washed in the dishwasher, since it would 

cause it to harden prematurely.

•  If some leftover food is difficult to remove soak the parts before 

cleaning in some dishwater.

11

•  Especially sticky leftover food can also be carefully removed 

with a wooden spatula and some stove cleanser.

•  The gasket should be replaced once a year when used 

regularly.

sizzle Storage

•  sizzle

 should not be stored with the lid closed. In the 

absence of ventilation, condensation can form and develop 
unpleasant odours or cause damage.

•  The gasket should never be stored folded or deformed.

•  Should the handle screws loosen, they can be tightened 

with a suitable screwdriver.

Pressure release valve          Gasket       

Patented safety valve

2

1

Knurled nut                  Gasket                   Valve dowel

Valve stem guide         Steel ball

b

c

d

e

a

Pr

essur

e r

elease v

alv

e

Pat

ent

ed saf

et

y v

alv

e

a

a

b

b

e

d

c

1

2