background image

Product

Support Guide

water

witch

Electronic Water Leveller

ii

THE WATER WITCH SMART SENSE

Thank you for purchasing the Water Witch Smart Sense electronic 

water leveller. The Water Witch has been Australia’s most trusted 

auto leveller for more than 25 years and we’re excited to bring this 

new model to you. The Water Witch Smart Sense continues our 

promise of great reliability and now includes a host of added benefits.

The development of the original Water Witch harks back to the 1980s. As a 

pool builder I was frustrated with the poor quality and reliability of levellers 

at the time. Many prototypes were tested in my shed at home until we were 

comfortable we had developed the highest-quality leveller.
Many years of industry experience and talking to pool builders about what 

features they want in an auto leveller guided our development of the Water 

Witch Smart Sense.  We’re extremely proud of the new unit and its many 

additional features.
Importantly, the new Water Witch features full backward and forward 

compatibility with previous models.  Any combination of Water Witch Control 

Box, Sensor and Solenoid will provide a great experience for your pool or 

water project.
As always, we promise to deliver the very best product to you. Thank you 

for your support and we trust your Water Witch will deliver many years of 

reliable service.

Cliff Cooke

Managing Director

Summary of Contents for WATER WITCH SMART SENSE

























Reviews: