GB
The heating elements do not heat up
• Check the fuse valves.
• The main power switch is disconnect or faulty.
• The voltage is too low.
• The control thermostat is faulty.
• The heating element is faulty.
• The safety thermostat has tripped.
The temperature control does not work
• The control thermostat is faulty.
• The heating element is faulty.
• The safety thermostat has tripped.
Do not tamper any components.
The electrical components are inside the heating unit.
Remove the heating unit
• Remove the intermediate shelf.
• Remove the heating unit by removing the back side and then the front
Accompanying the power cable through operation.
The temperature control thermostat
• Remove the heating unit
• Disconnect the termostat. Remove the termostat bulb from its support.Replace.
Heating element
• Remove the heating unit
• Disconnect the wiring to fan motor and the resistance
• Remove the box leads resistance and fan motor.
• Disconnect and remove the resistance that is defective
Internal Fan
• Remove the heating unit
• Disconnect the wiring to fan motor and the resistance
• Remove the box leads resistance and fan motor.
• Disconnect and remove the motor fan that is defective
Main power switch
• Remove the heating unit
• Disconnect and remove the switch. Replace the part
IMPORTANT
:
Always disconnect the appliance from the mains power supply using the main power switch before
carrying out maintenance work or repairs.
IMPORTANT
:
The electrical power supply readings must correspond with the ratings shown in Tables T1. If not,
switch off the appliance and contact your local Electricity Board immediately.
TROUBLESHOOTING GUIDE
REPLACEMENT OF SPARE PARTS
GRX 1
15 / 33
