background image

 

10

 

 

 

B422784 - 190918 

 

Fill the large feeder tube with ice cubes. The feeder tube must not 
be filled to more than 80% full. 

 

Cut the vegetables into suitably sized pieces and place the pieces 
in the feeder tube. 

 

Ensure that the tab on the locking ring fits down into the recess 
around the activation pin. 

 

Hold the pusher with one hand and slowly push it down into the 
feeder tube, while holding down the off button on the locking ring 
with the other hand. 

 

Release the on/off button on the locking ring to stop the appliance 
if you wish to add more ice. Turn the tab on the locking ring away 
from the motor unit while filling it to avoid accidentally starting the 
appliance. 

 

Pull out the collection tray and empty out the crushed ice when 
finished.  

CLEANING AND MAINTENANCE 

 

Remove the plug from the socket and allow the appliance to cool 
before cleaning. 

 

Do not immerse the motor section of the appliance in water and 
make sure no water enters the appliance. 

 

Clean the motor section by wiping it with a damp cloth. A little 
detergent can be added if the appliance is heavily soiled. 

 

Do not use scouring pads, steel wool or any form of strong solvents 
or abrasive cleaning agents to clean the appliance, as they can 
damage the external surfaces of the appliance. 

 

Take the appliance apart and clean all of the accessories 
separately. The base unit, lid, collection tray, feeder tubes and 
pushers can be cleaned in warm water with a little mild detergent. 
The holder and the attachments should be rinsed under running 
water. If they have become stained from use, wash them using 
some mild detergent. The parts are not dishwasher safe.  

 

Be careful not to touch the blades or sharp parts during use and 
cleaning. 

 

IMPORTANT: Allow to dry completely after cleaning. Do not use the 
appliance if it is damp. 

 

Ensure the appliance is clean and dry before storing. 

Summary of Contents for B422784-00003













Reviews: