background image

 

7

 

 

 

B422785 - 191031 

 

Do not chop foods with hard parts, the central core of pineapples 
for example (woody shells, etc.); do not chop particularly hard 
types of food (ice, hard cheese, etc.). 

 

Important:  

When assembling the bowl on the base, please make sure to always 
position the handle of the bowl on the right side, facing the food 
processor, or the safety switches will not be triggered, and the 
appliance will not work 

HOW TO DISASSEMBLE 

 

Remove the pusher. Turn the lid or citrus sieve counterclockwise, lift 
and remove. 

 

Lift the blades or disks or accessories from the driver. Be careful, 
blades are sharp. 

 

Turn bowl, blender jar or grinder counterclockwise to unlock from 
motor base. Lift and remove. 

 
 

OPERATING INSTRUCTIONS 

SPEED REGULATOR & PULSE SPEED 

 

 

Use the speed control knob on the motor base to adjust speed. 

 

Turn the knob to the right to gradually increase speed. 

 

Turn the knob to the left for the Pulse function. When using the Pulse 
mode, the unit works at higher high speed in small intervals of time. 

 
CHOPPING & KNEADING BLADES 
 

 

 

2 versatile knife blades are included as attachments, a stainless-steel 
blade to chop foods and plastic blade to knead dough. Use the image 
below as a step by step guide to assemble the knife blades into the 
appliance.  

Summary of Contents for B422785-00003-00000





















Reviews: