4. Install the motor unit into food holder gear box.
5. Place a single piece of food in the food chute. For
best results, cut food to be no longer than the food
chute’s height and no more than 2.8 inches wide.
Both ends of the food should be cut flat to allow food
chute to rotate the food.
6. Then plug the appliance into an electrical outlet. It is
suggested to start at 3 and adjust throughout
spiralizing. Press the start bu@on to begin spiralizing,
the start bu@on will need to be held throughout the
processing slowly push the food down with the
motor un0l most of the food is processed. NOTE:
There might be food that will remain unprocessed
depending on the food.
9
