HOW TO ASSEMBLE YOUR CIRCLE EASY FLIP PAN™
•
Place your Easy Flip lower pan (not included) on a flat surface, with the handle
facing towards the right.
•
While holding the cover at a 90° angle, line up the hinges and gently slide the cover
to the right into the key hole on the lower pan. The key hinge on the cover will line
up with the keyhole on the lower pan.
•
You will know the key hinge is inserted into the keyhole correctly when you can no
longer slide the cover to the right. You will also be able to see the key hinge on the
other side of the keyhole, as shown below.
•
With the cover and key hinge fully attached to the lower pan and keyhole at a 90°
angle, you will be able to gently close the pan so that the magnets attach.
NOTE: If the cover is not fully to the right or inserted properly and you attempt to
close the pan, it could break the hinge and will void your warranty
.
HOW TO REMOVE THE CIRCLE COVER OF YOUR EASY FLIP PAN™
•
Place your Easy Flip Pan™ (lower pan not included) on a flat surface, closed,
with the handle facing towards the right.
•
Open the Circle Pan cover fully to a 90° angle, line up the hinges and gently
slide the cover to the left out of the hinge slot on the lower pan.
•
Once the Circle Pan cover is detached from the lower pan you can switch out
the Circle Pan with another Easy Flip cover (not included). Such as the Easy Flip
Grill, Easy Flip Griddle, or use any of the Easy Flip Pans™ alone with the glass lid
(not included).
NOTE: If the cover is not fully opened to a 90° angle and you attempt to
detach the pan, it could break the hinge and will void your warranty
.
