3
Contents
2.
Introduction
3.
Safety information and general warnings
4.
Technical specifications
4.
Cleaning and maintenance
5.
Description of parts
6.
Before first use
6.
Instructions for use
7.
Using the blender
8.
Plug wiring
9.
Guarantee
Safety information and general warnings
•
To prevent the risk of electric shock, do not place the base or motor in
water or any other liquid.
•
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understandable hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by
children unless they are older than 8 and supervised.
•
When not in use, before operating, when removing or installing
accessories and before cleaning, unplug the appliance from the mains
power supply.
•
Always avoid contact with moving parts.
•
Do not operate any appliance with a damaged cord or plug or if the
appliance shows any indication of a malfunction. Do not use the
appliance if it has been dropped or damaged in any way and take to
your local electrical store for repair.
•
This product must only be used with the attachments supplied. Use of
any other attachments may result in damage to the appliance or injury
to the user.
•
This appliance is not suitable for use outside.
•
Do not let power cable hang over the edge of a table or counter-top,
never let it meet hot surfaces.
•
To prevent the possibility of severe personal injury and/or damage to
the appliance, keep hands and utensils out of containers while
processing and away from moving blades. A rubber spatula may be
used, but only when the appliance is not operating.
•
Blades are very sharp; Handle with care. Always store the appliance
out of the reach of children.
•
Make sure the blade or disc has fully stopped before removing the
cover.
•
Always begin processing at the lowest speed setting.
