FireGard™ Chain and Crank
2
IMPORTANT MECHANICAL INSTALLATION PROCEDURE
WARNING
-
To reduce the risk of severe injury or death:
1.
READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS.
2.
Spring tension must be adjusted to allow the fire door to self close during a drop test. A door
that is operating improperly could cause severe injury. Have qualified door system technicians
make repairs to spring assemblies and other hardware before installing the operator.
3.
Cover any exposed, moving operator parts that are less than 8 feet above the floor.
4.
When utilized, locate the “push to close” control station: (a) within sight of the door, (b) at a
minimum height of 5 feet so small children cannot reach it, and (c) away from all moving parts
of the door.
5.
Instruct the end user on proper operation of the operator.
6.
The door is under extreme spring tension. Have qualified door system technicians make all
necessary adjustments and repairs to the door.
7.
When utilized, read and understand the wiring diagram of the alarm release device box.
8.
For products having a manual release, instruct the end user on the operation of the manual
release.
