background image

You are about to revolutionize the way the Pizza Industry delivers pizza. As you
read this booklet you will begin to discover all of the benefits the CookTek
FlashPak Pizza Thermal Delivery System* (PTDS) has to offer. We believe you
will quickly come to appreciate the new level of speed, operational ease, and
quality that the cordless CookTek FlashPak PTDS brings to your delivery business.
And we at CookTek are truly proud and happy to bring you this innovation. The
FlashPak PTDS is intended for use in Pizza Delivery restaurants and should be
used solely for the purpose of keeping pizzas hot during regular deliveries.

BEFORE USING YOUR COOKTEK PTDS

PLEASE TAKE TIME TO COMPLETE THE FOLLOWING:

• Read the entire Owner’s Manual and Warranty and save it for future reference.
• Be sure to register your PTDS unit(s) by completing and mailing the Consumer

Product Ownership Registration Card.

• Record the serial number of your charger unit on the warranty page of this

booklet and keep it in a safe place.

• If, upon receipt, your unit appears damaged in any way, please note the

following: 

Visible Loss Or Damage:

Any visible loss or damage must be noted on the

freight bill or express receipt and signed by the person making the delivery. A
claim for damages must be filed immediately, regardless of extent of damage.

Concealed Loss Or Damage:

If damage is not visible until merchandise is

unpacked, notify the transportation company or carrier immediately, and file a
“concealed damage” claim with the carrier. This should be done within fifteen
(15) days of delivery date. The shipment container and packing materials must
be retained for inspection. 

The transportation company assumes full responsibility for the safe delivery upon
acceptance of this shipment. 

CookTek cannot assume responsibility for damage

or loss incurred in transit.

CookTek will, however, provide any assistance and

documentation necessary to support your claim.

To save time before requesting service, check the Troubleshooting chart at the end
of this manual for possible solutions to your problem. It lists causes of minor oper-
ating problems that you can correct yourself without removing the housing or
exposing the internal electronics. 

Do not, for any reason, attempt to service or

open the FlashPak PTDS charger.

A CookTek authorized service dealer must

remove the housing and perform all service to the internal electronics or you will
void the warranty.

2

Summary of Contents for 500100











Reviews: