ISSUE-1 25/7/2017
7
Cleaning
To maximize the efficiency of the coffee maker, clean and descale
regularly
1.
Switch off and unplug the coffee maker and allow the coffee
maker to cool completely.
2.
Open the filter holder, remove and empty the mesh filter and
place the glass jug onto the hotplate.
3.
Descale with a proprietary descaler suitable for plastic coffee
makers and use in accordance with the instructions on the pack.
Alternatively half fill the coffee maker with water and add the
juice of one lemon. Close the lid, switch on and allow the coffee
maker to transfer some of the descaling solution before turning
the coffee maker off and allowing it to stand for 15 minutes.
Repeat this last step a further two times before discarding the
solution.
4.
After descaling, fill the coffee maker to the maximum level with
clean water, close the reservoir lid and allow the coffee maker to
work. Do not use a paper filter and discard the hot water after it
is finished. Repeat this step a second time.
5.
Wash loose parts (mesh filter,
glass jug with lid) in hot water with
a little washing up liquid. Rinse and dry thoroughly. Not suitable
for the dishwasher.
6.
Wipe external surfaces with a soft damp cloth and dry surfaces
with a soft dry cloth. Do not use detergent or abrasives as these
may scratch the surface. Never immerse in water.
Technical specification
Rated voltage
220-240V AC 50/60Hz
Power consumption
730 - 870W
Class rating
I (Earthed)
BS 1362 fuse
13A
Capacity
10 cups / 1.25 litre
