Issue 2 05/08/2021
9
FOOD PROCESSOR - USING THE ACCESSORIES (continued)
Chipping, slicing or shredding blades
The blades can be used for grating, slicing or shredding hard
cheese and firm vegetables such as carrots, potatoes, beetroot,
onions etc.
•
Fit the desired blade into the blade holder.
•
Assemble the processor with the blade holder fitted onto the
blade support, but do not add the ingredients into the bowl.
•
Cut ingredients into sizes of sufficient size to fit down the
feed tube and remove any peel and stones. If julienne
vegetables are required ensure that the vegetables are not too
short at the point that they are added.
•
Switch the processor on and feed the ingredients down the
feed tube and onto the cutting blade, using the pusher to
keep contact with the spinning disc and keep an even
pressure.
•
Use for a maximum of 90 seconds. If further slicing /
shredding is required, wait 2 minutes before restarting the
processor. If the unit is used for 3 consecutive cycles, wait
30 minutes before the next use.
•
The usual process speed for this accessory is speed 2.
Summary of Contents for FP9076-GS
Page 13: ...Issue 2 05 08 2021 13 ...
