ISSUE-2 14/8/2017
6
Assembling and fitting the rotisserie spit
Fit the claws onto the rotisserie spit with the claws facing
inwards.
Fit the thumb screws into the holes in the claws and turn until
secure.
Note that the spit has different shaped ends – see end ‘A’ and
end ‘B’ in the diagram above. End A is fitted first into the socket
on the right hand side of the oven before fitting end B into the
bracket on the left hand side of the oven (fig .5).
Always use the rotisserie handle to remove the spit from the oven
when hot. Place the hooked ends of the rotisserie handle under
the spit and into the notches (figs 6 & 7) and lift out.
A
B
Fig. 4
Fig. 3
Fig. 5
Fig. 7
Fig. 6
Summary of Contents for KR-93-28
Page 13: ...ISSUE 2 14 8 2017 13 ...
