MAINTENANCE AND CLEANING INSTRUCTION
Methods for replacing UV lamp
●
Photo sensor is built-in the device, if the UV light is very weak or not lighted, the UV icon on the product operating
panel will be flashing; it means UV lamp should be replaced. The diagram as following:
Maintenance and cleaning instruction
●
Cleaning the body for this device by damp cloth, then wipe it dry.
If machine is too dirty,
neutral detergent can be used for cleaning, but please dilute the detergent before use.
●
Do not clean the unit with the solvent listed on the right which may cause distortion or discolour.
●
Please remove plug from the socket before
cleaning and maintenance .
Decontamination
power
Alkalescence
Benzene
Acohol
Scour
Maintenance and cleaning instruction
Hold the UV lamp and rotate it for 90 clockwise or anticlockwise,
then take it out.
Hold the UV lamp and rotate it for 90 clockwise or anticlockwise,
then install it well.
● Take off the front cover, and take out all filters, then UV lamp can be replaced.The diagram as following:
Disassembly and installation for UV lamp
MAINTENANCE AND CLEANING INSTRUCTION
13
14
User manual
UV lamp replacement indicator
Timer
Smart
Speed
Function
Reset
%
Smart air purifier
