The Cool Cat “Vibe” is like a prehistoric chorus that has emerged
from a swamp. Funky, inspiring, and addictive.
CONTROLS:
INTENSITY: Controls the intensity (or depth) of the Vibe,
from minimum (fully counter-clockwise) to maximum (fully
clockwise). When the Intensity control is set to minimum, the Vibe
sound will remain static, regardless of the Speed control.
SPEED: This controls the speed of the Vibe, from minimum
(fully counter-clockwise) to maximum (fully clockwise). The
Speed control will have no effect unless the Intensity control is set
higher than minimum (off).
MIX: When the Mix control is fully counter-clockwise, there is
no Vibe effect – it’s 100% dry. When the Mix control is set to
maximum, all you’ll hear is the effected signal – 100% wet. By
setting this control in-between minimum and maximum you can
choose the perfect dry to wet ratio. Notice that adjusting the
Mix control subtly alters your tonal balance.
NOTE: The Cool Cat Vibe adds a touch of saturation to your
sound – this is normal. It’s also possible to make it break up by
using super hot pickups or clanging your guitar. If this happens, try
a lighter touch, or turn down your guitar’s volume control.
BYPASS: The true bypass footswitch engages and disengages
the pedal.
SAMPLE SETTINGS: (Remember, these are only starting points.)
“Daydreamer”
(Perfect for woolgathering with your favorite
guitar.)
Intensity – 2:00
Speed – 8:00
Mix – 12:00
“Shimmer”
(A fast rotating speaker sound with a 60’s attitude.)
Intensity – 1:00
Speed – 3:45
Mix – 12:30
“The Wobbler”
(Much like the effect on some very rare tube
amps from the 50’s – the pitch wobbles slightly like a 45 rpm.
turntable with an off-center spindle.)
Intensity – 2:00
Speed – 1:00
Mix – 4:30
VIBE
CV-1
Features
VIBE FEATURES CONTINUED:
