7
•
Peel off the protective PVC film from all sides.
•
Remove the plastic protection from the core temperature probe.
•
Place the appliance horizontally in a well-ventilated location.
•
Avoid locations directly next to a heat source or in direct sunlight.
•
The location for installation must be well ventilated and low in dust.
•
The air humidity should not exceed 70%.
•
Any unevenness of the floor must be levelled out by the builder.
•
The intake and exhaust area of the machine compartment (ventilation slots) must be kept
clear to ensure a good ventilation.
•
The surrounding temperature should be b16°C and +32°C.
•
A minimum clearance of 50 mm must be maintained on all sides to ensure a proper air
circulation.
•
The various packaging elements must be disposed of appropriately in accordance with the
regulations that are in force in the country where the unit is used. In any case, the environment
is not to be contaminated with any parts of the packaging material.
6.3. ELECTRICAL CONNECTION
The unit is supplied with a plug for connection to a power supply line.
The unit must be connected by qualified personnel.
The manufacturer rejects all liability in the event of a connection by the user or by unqualified
personnel.
Door
Machine
compartment,
with air grille and
switch box with
rating plate label
Touch screen
Height-adjustable
feet
Slide-in condensate tray
