9
OPTION PROGRAMMING
To Engage Option Programming:
1.
Turn Ignition Key to the ON position. Do not start vehicle.
2. Press the Program / Valet button 5 times. Wait for the unit to flash the lights or park light LED flashes 5 times.
3. Push the valet program button the number of times that corresponds to the option number desired (1-26X). You
must get a light flash after each button press. If the system did not flash the lights and, then it did not register your
press. Press carefully and do not lose count.
4.
For DS-3, DS-4, DS-7:
When you reach the desired option #, to change the option: Press button #1
Lock
,
#2
Unlock, #3 Trunk, #4 Start.
(Some option numbers use ALL 4 remote buttons to select settings)
5.
For DS-00, DS-1:
(No Lock button) tap the brake pedal to toggle through the option values: Tap brake once
(lights flash 1X) Tap the brake pedal again (Lights flash 2X) tap 3 or 4 times for options that have 3 or 4 values.
6. When finished, turn Ignition OFF, and check for changed features.
OPTION PROGRAMMING TABLE
Option #
Option Description
TX Button #1
TX Button #2
Default Value
TX Button #3
TX Button #4
1
Engine Monitoring
Tach
(thru data)
*Tachless*
Hybrid
2
Autolock with RPM / Ignition
ON
*OFF*
3
Door Lock Pulse
3 Seconds
*0.50 Seconds*
Double Unlock
“Wake Up” pulse
with Unlock
4
Pink/white Wire Selection
ACC
*IGN*
START
5
Data Port Protocol
ADS iDatalink -
OFA Series
*Fortin -
EVO / SL Series*
6
Remote Start & Trunk Release
Button Selection
Double Button Press
*½ Second Press*
Press and Hold
7
Horn Chirps on Remote Start
ON
*OFF*
